Traffic Queuing Configuration; Queue Priorities - NetComm NB5PLUS4/W User Manual
Adsl/adsl2 modem router
Hide thumbs
Also See for NB5PLUS4/W:
- Connection setup (2 pages) ,
- Specifications (2 pages) ,
- Firmware upgrade manual (2 pages)
Table of Contents
Advertisement
Rule definitions will be defined by the user by allowing the user to select matching
based on Source IP, Destination IP, IP Protocol, Source Port, Destination Port, and
Incoming Mac Port (switched LAN Port). These selections will define a rule and be
associated with a particular queue priority: High, Medium, and Low.
Traffic Queuing Configuration
Based on the TOS (DSCP) marking, the NB5Plus4/W shall prioritize the traffic serv-
icing on the outgoing interface (facing the Access Network) using a 3-band priority
mechanism as described below.
Queue Priorities:
NB5Plus4/W User Guide
44
YML754Rev1
www.netcomm.com.au
Advertisement
Table of Contents
Need help?
Do you have a question about the NB5PLUS4/W and is the answer not in the manual?