Tools>Modem Test; Status; Status>Network Statistics - NetComm NB5PLUS4/W User Manual
Adsl/adsl2 modem router
Hide thumbs
Also See for NB5PLUS4/W:
- Connection setup (2 pages) ,
- Specifications (2 pages) ,
- Firmware upgrade manual (2 pages)
Table of Contents
Advertisement
tivity directly from the NB5Plus4/W to the Internet or to a computer on your Net-
work. You must make certain that the IP address that you ping will actually respond
to a ping before interpreting the results of the ping.
Note:
Computers and Network devices can be configured to communicate even
though they do not respond to a ping, this can sometimes be done for
security.
Tools>Modem Test
This test can be used to check whether your Modem is properly connected to the
Network. This test may take a few seconds to complete. To perform the test, select
your connection from the list and press the Test button.
Note:
Errors or failures on this test do not specifically mean your connection is
faulty, only your ISP can tell you if these tests should pass or fail.
Status
The Status section allows you to view the Status/Statistics of different connections
and interfaces.
Status>Network Statistics
You can view data statistics for your Ethernet ports combined or for your ADSL port
in these pages.
Note:
The statistics will be reset on loss of power or Reboot/Reset.
NB5Plus4/W User Guide
4
YML754Rev1
www.netcomm.com.au
Advertisement
Table of Contents
