Advertisement
Quick Links
NB1200 Connection Fix
NB1200 Connection Fix
This document will discuss how to fix an error that occasionally occurs when
attempting to connect to ADSL using the NB1200.
In some cases, the NB1200 may not be able to connect to your ADSL provider, it will
usually report either Error 630: The computer you are dialing into is not responding
(98,2K, ME) or Error 721: The remote computer is not responding (XP).
To remedy this, double click the DSL icon which is in your system tray, as shown
below:
The ADSL Control and Status window should appear after a few moments, as shown
below:
When the window has loaded, verify that the both Connection Status and Device
Status show the same as above.
Page 1 of 7
Double click the
"DSL" icon.
18/09/2003
Check that your
status window
matches what is
shown in the
screenshot on the
left.
Advertisement
Related Manuals for NetComm NB1200
Summary of Contents for NetComm NB1200
- Page 1 This document will discuss how to fix an error that occasionally occurs when attempting to connect to ADSL using the NB1200. In some cases, the NB1200 may not be able to connect to your ADSL provider, it will usually report either Error 630: The computer you are dialing into is not responding (98,2K, ME) or Error 721: The remote computer is not responding (XP).
- Page 2 NB1200 Connection Fix Now, hold down the Control and Shift keys together, and click on the NetComm logo at the top of the ADSL Control and Status window. Page 2 of 7 18/09/2003 Click here while holding down the Control and Shift...
- Page 3 NB1200 Connection Fix If you’ve done this correctly, the window below should be displayed on your screen: Click here. Click on the Advanced button that is now displayed in the ADSL Control and Status window. Page 3 of 7 18/09/2003...
- Page 4 NB1200 Connection Fix A menu will be shown after pressing the Advanced button, click in the heading marked Encap, as shown below: Click here. Page 4 of 7 18/09/2003...
- Page 5 NB1200 Connection Fix This will launch the Encap tab – Under PVC Settings, change from PPPoA (LLC) to PPPoA (VC Mux), then click Save. Leave all the other settings unchanged. Page 5 of 7 Then click here. 18/09/2003 Select PPPoA (VC...
- Page 6 NB1200 Connection Fix After pressing save, wait a few moments, then you will see this message on your screen: Click OK. Then click Done to close the Advanced Properties window. Click here. Then click here. Page 6 of 7 18/09/2003...
- Page 7 You will be returned to the basic ADSL Control and Status window. Verify that your Connection Status and Device Status You should now be able to connect to your ADSL provider, using the NetComm ADSL dialup connection. Page 7 of 7...
Need help?
Do you have a question about the NB1200 and is the answer not in the manual?
Questions and answers