Dhcp Connection Setup; Bridge Settings - NetComm NB5PLUS4/W User Manual

DHCP Connection Setup

Option
En­capsulation­:
IP Address:
Mask:
Gateway:
Default Gateway:

Bridge Settings

En­capsulation­:
Select LAN:
YML754 Rev1
www.netcomm.com.au
Description
Select the method of encapsulation
used by your ISP from the drop-down
list box. Choices vary depending on the
mode you select in the Mode field.
The IP address assigned by an external
DHCP server.
The subnet mask assigned by an exter-
nal DHCP server.
The gateway assigned by your DHCP
server.
Enable this if you want to use this pro-
file connection as the default gateway
for clients to connect to the Internet.
Select the method of encapsulation
used by your ISP from the drop-down
list box. Choices vary depending on the
mode you select in the Mode field.
Select the LAN group to which you want
to bridge this connection to. Having a
Bridged Connection places the modem
into a 'dumb' mode. The modem con-
nects to the ISP, but does not perform
authentication, routing or firewalling
functions. You will need to have an addi-
tional router plugged into a LAN port of
your modem to perform these functions.
NB5Plus4/W User Guide
5