Sony DCR-IP210E Operating Instructions Manual page 208

Connecting your camcorder to
your computer using the USB
cable (For Windows users)
6 Turn the POWER switch to (CHG) OFF on
your camcorder, and then disconnect the USB
cable.
7 Restart your computer.
Step 2: Install the USB driver on the supplied
CD-ROM
Perform the entire procedure described in
"Installing the USB driver" on page 201.
Viewing images recorded on a
"Memory Stick"
Step 1: Uninstall the incorrect USB driver
1 Turn on your computer and allow Windows
to load.
2 Insert a "Memory Stick" into your camcorder.
3 Connect the AC power adaptor, and set the
POWER switch to MEMORY.
4 Connect the USB connector on your computer
to the (USB) jack on your camcorder using
the USB cable supplied with your camcorder.
5 Open your computer's "Device Manager".
Windows 2000 Professional:
Select "My Computer" t "Control Panel" t
"System" t "Hardware", and click the
"Device Manager" button.
Other OS:
Select "My Computer" t "Control Panel" t
"System", and click "Device Manager".
6 Select "Other devices".
Select the device prefixed with the "?" mark
and delete.
Ex: (?)Sony Handycam
7 Turn the POWER switch to (CHG) OFF on
your camcorder, and then disconnect the USB
cable.
8 Restart your computer.
Step 2: Install the USB driver on the supplied
CD-ROM
Perform the entire procedure described in
"Installing the USB driver" on page 201.
Downloaded From VideoCamera-Manual.com Manuals
208
Подсоединение Вашей видеокамеры к
Вашему компьютеру с помощью кабеля
USB (Для пользователей Windows)
6
7
Пункт 2: Установка драйвера USB с
прилагаемого CD-ROM
Просмотр изображений, записанных
на "Memory Stick"
Пункт 1: Удаление неправильного
драйвера USB
1
2
3
4
5
Windows 2000 Professional:
Другие ОС:
6
7
8
Пункт 2: Установка драйвера USB с
прилагаемого CD-ROM
t
t t
t
t