Sony DCR-IP210E Operating Instructions Manual page 201

Connecting your camcorder to
your computer using the USB
cable (For Windows users)
Installing the USB driver
Start the following operation
without connecting the USB cable to
your computer.
Connect the USB cable according to
"Making the computer recognise
your camcorder".
If you are using Windows 2000 Professional, log
in with permission of administrators.
If you are using Windows XP, log in with
permission of computer administrators.
(1) Turn on your computer and allow Windows
to load.
(2) Insert the supplied CD-ROM in the CD-ROM
drive of your computer. The application
software starts up and the title screen appears.
(3) Move the cursor to "USB Driver" and click.
This starts USB driver installation.
(4) Follow the on-screen messages to install the
USB driver.
(5) Remove the CD-ROM and then restart the
computer, in accordance with the instructions
on the screen.
Note
If you connect the USB cable before USB driver
installation is complete, the USB driver will not
be properly registered. Carry out installation
again in accordance with the steps on page 206.
Downloaded From VideoCamera-Manual.com Manuals
Подсоединение Вашей видеокамеры к
Вашему компьютеру с помощью кабеля
USB (Для пользователей Windows)
Установка драйвера USB
Начните выполнение следующих
действий без подсоединения
кабеля USB к Вашему компьютеру.
Подсоедините кабель USB
согласно разделу "Как добиться,
чтобы компьютер распознавал
видеокамеру".
(1)
(2)
(3)
(4)
(5)
Примечание
201