Sony DCR-IP210E Operating Instructions Manual page 15

Recording a picture
2
Set the POWER switch
to CAMERA. The
CAMERA lamp lights
up.
POWER
Viewfinder
When the LCD panel is closed with the
LCD screen facing inwards, use the
viewfinder.
Adjust the viewfinder lens to your
eyesight (p. 41).
3
Open the LCD panel. The
picture appears on the LCD
screen.
Monitoring the playback picture on the LCD
screen
1
Set the POWER switch
to VCR.
The VCR lamp lights up.
Note
Do not pick up your camcorder by
the LCD panel or the jack cover.
Downloaded From VideoCamera-Manual.com Manuals
When you purchase your camcorder, the clock setting is not
set up yet. Set the clock setting before recording (p. 31).
(p. 55)
POWER
(p. 38)
4
2
Press
rewind the tape.
3
Press
playback.
Note
When using the touch panel, press
operation buttons lightly with your finger
or the supplied stylus (DCR-IP220E only).
Do not press the LCD screen with sharp
objects other than the stylus supplied
(DCR-IP220E only).
1
Remove the lens cap.
Press START/STOP. Your
camcorder starts recording.
To stop recording, press
START/STOP again.
of the touch panel to
of the touch panel to start
15