Advertisement
Quick Links
Advertisement
Related Manuals for Contura C 630
Summary of Contents for Contura C 630
- Page 1 Installation instruction C 630 www.contura.eu...
- Page 2 See rating plate on the stove Intended area of use Heating of rooms in residential buildings Fuel Wood MANUFACTURER Name NIBE AB / Contura Address Box 134, Skulptörvägen 10 SE-285 23 Markaryd, Sweden CHECKS According to AVCP System 3 European standard...
-
Page 3: Table Of Contents
A warm welcome to the Contura family. We hope you will get a great deal of pleasure from your new stove. As a new owner of a Contura stove, you have secured a product with timeless design and long service life. -
Page 4: Technical Details
FACTS Important to remember! Technical details Installation by authorised Structural support Effect 3-9 kW Nominal effect 6 kW technician Check that the wood joists are strong Efficiency up to 79% enough to bear the weight of the stove and This manual contains instructions about chimney. -
Page 5: Installation Distances
INSTALLATION DISTANCES Installation distances C 630 The minimum distance in front of WHEN INSTALLING TURNTABLE (OPTION) Combustible roof following installation distances do not apply. the stove opening to combustible See the separate turntable installation parts of the building or interior instructions. -
Page 6: Connection To Chimney
CHIMNEY Connection to chimney • The stove meets the requirements for connecting to chimneys • A flue with sharp bends and horizontal routing reduces the dimensioned for 350°C flue gas temperature. draught in the chimney. The maximum horizontal flue is 1 m, on the condition that the vertical flue length is at least 5 m. -
Page 7: Supply Of Combustion Air
SUPPLY AIR/ACCESSORY Supply of combustion air When a stove is installed in a room, the demand for air supply to the room increases. Air can be provided indirectly via a vent in the outer wall or via a duct from the outside that is connected to the connector on the underneath of the stove. -
Page 9: Assembly
ASSEMBLY Installing C 630 If the stove will not be equipped with a heat tank skip steps 3-5. - Page 10 ASSEMBLY...
- Page 11 ASSEMBLY If the stove will not be equipped with a heat tank skip step 9.
- Page 12 ASSEMBLY With heat tank. Without heat tank. Install hot air grate with damper function. Install standard hot air grate.
- Page 13 ASSEMBLY Position the supplied rating plate as illustrated. Final inspection of the installation It is extremely important that the installation is inspected by an authorised chimney sweep before the stove is used. Also read the ”Lighting instructions”, before lighting for the first time.
-
Page 14: Removing The Loose Parts
REMOVAL Removing the loose parts How to remove the heat deflector How to remove the hearth surround (Vermiculite) Handle the vermiculite with care. Lift the smoke baffle with one hand whilst removing the sides pieces. Reinstall in reverse order... - Page 16 NIBE AB · Box 134 · SE-285 23 Markaryd · Sweden www.contura.eu Contura reserves the right to change colours, materials, dimensions and models at any time without special notice. 811170 IAV SE-EX C630 - 7 Your dealer can give you the most up to date information.