Advertisement
Quick Links
Advertisement
Related Manuals for Contura C 51L
Summary of Contents for Contura C 51L
- Page 1 Installation/Lighting INSTRUCTIONS C 51L www.contura.eu...
- Page 2 Contura 51L is a Swan marked wood burning stove. NIBE was the first stove manufacturer in Sweden to commit to Swan marking stoves. The Swan mark is one aspect of our vision to be a company of the future, setting high quality standards regarding the environment.
-
Page 3: Table Of Contents
A warm welcome to the Contura family. We hope you will get a great deal of pleasure from your new stove. As a new owner of a Contura stove you have secured a product with timeless design and long service life. Contura also has combustion that is both environmentally friendly and efficient for the best heat production. -
Page 4: General
To guarantee the function and safety of the stove we recommend necessary for you to apply that it is installed by a professional. Our Contura agents can for planning permission recommend a suitable installer. -
Page 5: Installation Distance To Walls And Ceiling
INSTALLATION DISTANCES Installation distance to walls and ceiling C51L Move the stove in position and check that the installation distances given in the diagrams are met. The minimum distance between the stove opening and combustible parts of the building or décor must be at least 1 m. When top connecting a steel flue please refer to the relevant manufacturer’s installation instructions. -
Page 6: Removing The Loose Components
REMOVAL Removing the loose components Fire bars Lift the fire bars straight up, clean the ash from the guide groove in the stove base plate before repositioning it in position. Fire box surround When sweeping, the smoke baffle must be lifted out, this can be done when one side has been dismantled. - Page 7 REMOVAL Removing the loose components Stove base plate The stove base plate is lifted out when all the cladding has been removed. Fixed or removable handle The stove handle is fitted on delivery. To make the handle removable, replace the screw for the lock hook with the shorter screw supplied.
- Page 8 ADJUSTING AND CONNECTING Adjusting and connecting Preparations before rear connection The stove is prepared for top connection on delivery. When connecting from the rear, the cover and connection must be swapped around. • Dismantle the cladding as instructed previously, see page 6-7. • Tap out the knock out in the stove’ s back panel, remember to protect the floor. • Then unscrew both the connector and the cover.
-
Page 9: Connection To The Chimney
CHIMNEY Adjusting the stove • Position the stove on the hearth plate. • Adjust the height of the four adjustable feet until the stove is horizontal. max Ø154 After the stove has been adjusted and positioned according to the installation distances, connection to the chimney is carried out. Put stove cement inside the flue connection and press the start pipe into the connection. -
Page 10: Lighting For The First Time
LIGHTING IN THE RIGHT WAY Wood loading It is important that the correct amount of wood is used, especially when lighting. If you are lighting the fire for the first time you 1. Open the door handle slightly and let the vacuum in the firebox should use a set of scales to see how much 2 kg kindling is. -
Page 11: Choice Of Fuel
Painted parts of the stove can be cleaned with a damp cloth and, if the glass. necessary, a little washing-up liquid. Damage, such as scratches, to painted parts can be repaired using Contura touch up paint. Contact Ensure that no embers remain when removing ash from the stove. The your dealer. -
Page 12: Lighting Instructions
We hope that these words of advice will help you to enjoy embers were too weak and cold to light the next load of wood. pleasant, economic and problem free use of your Contura stove. WHEN THE STOVE IS NEW...