Contura C 780 Installation Instructions Manual

Contura C 780 Installation Instructions Manual

Hide thumbs Also See for C 780:

Advertisement

811142 BAV GB-7
March 2014
USER MANUAL FOR STOVES WITHOUT BOILERS
SUPPLEMENTARY INSTALLATION INSTRUCTIONS FOR THE UK MARKET
TO BE READ IN CONJUNCTION WITH THOSE IN THE INSTRUCTION BOOKLET
READ THE INSTRUCTION BOOKLET AND THESE SUPPLEMENTARY INSTRUC-
TIONS CAREFULLY BEFORE INSTALLATION
These instructions together with those in the instruction booklet cover the basic principles to ensure the
satisfactory installation of the stove, although detail may need slight modification to suit particular local site
conditions.
In all cases the installation must comply with current Building Regulations, Local Authority Byelaws and other
specifications or regulations as they affect the installation of the stove.
It should be noted that the Building Regulations requirements may be met by adopting the relevant recom-
mendations given in British Standards BS 8303, BS EN 15287-1:2007 as an alternative means to achieve an
equivalent level of performance to that obtained following the guidance given in Approved Document J.
Should any conflict apply between these instructions and the original manufacturers instructions then the
most stringent advice must apply.
Please note that it is a legal requirement under England and Wales Building Regulations that the installation
of the stove is either carried out under Local Authority Building Control approval or is installed by a Competent
Person registered with a Government approved Competent Persons Scheme. HETAS Ltd operate such a Scheme
and a listing of their Registered Competent Persons can be found on their website at www.hetas.co.uk.
CO Alarms:-
Building regulations require that when ever a new or replacement fixed solid fuel or wood/biomass appliance is
installed in a dwelling a carbon monoxide alarm must be fitted in the same room as the appliance. Further gui-
dance on the installation of the carbon monoxide alarm is available in BS EN 50292:2002 and from the alarm
manufacturer's instructions. Provision of an alarm must not be considered a substitute for either installing
the appliance correctly or ensuring regular servicing and maintenance of the appliance and chimney system.

Advertisement

Table of Contents
loading

Summary of Contents for Contura C 780

  • Page 1 811142 BAV GB-7 March 2014 USER MANUAL FOR STOVES WITHOUT BOILERS SUPPLEMENTARY INSTALLATION INSTRUCTIONS FOR THE UK MARKET TO BE READ IN CONJUNCTION WITH THOSE IN THE INSTRUCTION BOOKLET READ THE INSTRUCTION BOOKLET AND THESE SUPPLEMENTARY INSTRUC- TIONS CAREFULLY BEFORE INSTALLATION These instructions together with those in the instruction booklet cover the basic principles to ensure the satisfactory installation of the stove, although detail may need slight modification to suit particular local site conditions.
  • Page 2: Fire Cement

    811142 BAV GB-7 March 2014 HEALTH AND SAFETY PRECAUTIONS Special care must be taken when installing the stove such that the requirements of the Health and Safety at Work Act are met. Handling Adequate facilities must be available for loading, unloading and site handling. Fire Cement Some types of fire cement are caustic and should not be allowed to come into contact with the skin.
  • Page 3 811142 BAV GB-7 March 2014 Chimney In order for the stove to perform satisfactorily the chimney height must be sufficient to ensure an adequate draught of approximately 15 Pa so as to clear the products of combustion and prevent smoke problems into the room.
  • Page 4 811142 BAV GB-7 March 2014 Combustible material should not be located where the heat dissipating through the walls of fireplaces or flues could ignite it. Therefore when installing the stove in the presence of combustible materials due account must be taken of the guidance on the separation of combustible material given in Building Regulations Approved Document J and also in these stove instructions.
  • Page 5: Combustion Air Supply

    811142 BAV GB-7 March 2014 Combustion air supply In order for the stove to perform efficiently and safely there must be an adequate air supply into the room in which the stove is installed to provide combustion air. The provision of air supply to the stove must be in accordance with current Building Regulations Approved Document J.
  • Page 6: Warning Note

    811142 BAV GB-7 March 2014 HETAS Ltd Approval; These appliances have been approved by HETAS Ltd as an intermittent operating appliance for burning wood logs only. WARNING NOTE Properly installed, operated and maintained this stove will not emit fumes into the dwelling. Occasional fumes from de ashing and re fuelling may occur.
  • Page 7: Air Controls

    811142 BAV GB-7 March 2014 CO Alarm Your installer should have fitted a CO alarm in the same room as the appliance. If the alarm sounds unexpectedly, follow the instructions given under “Warning Note” above. Air Controls Manually operated air control can be managed by adjusting the air control valve to increase/decrease the air flow to the stove.
  • Page 8: Chimney Fires

    811142 BAV GB-7 March 2014 Aerosol sprays Do not use an aerosol spray on or near the stove when it is alight. Use of operating tools Always use the operating tools provided when handling parts likely to be hot when the stove is in use. Chimney Fires If the chimney is thoroughly and regularly swept, chimney fires should not occur.
  • Page 9 811142 BAV GB-7 March 2014 Refuelling on to a low fire bed: If there is insufficient burning material in the firebed to light a new fuel charge, excessive smoke emission can occur. Refuelling must be carried out onto a sufficient quantity of glowing embers and ash that the new fuel charge will ignite in a reasonable period.
  • Page 10 1993 when burning dry seasoned wood logs in accordance with the instructions and when fitted with the permanent stops detailed below: The Contura 500 series must be fitted with a mechanical stop to prevent closure of the air control vent beyond the 20% open position when sold into smoke control areas.
  • Page 12 811142 BAV GB -7 NIBE AB · Box 134 · 285 23 Markaryd · Sweden www.contura.eu 2014-03-03...
  • Page 13 Installation Instructions C 780 www.contura.eu...
  • Page 14 Contura 780 is a Swan marked stove. NIBE was the first stove manufacturer in Sweden to commit to Swan marking stoves. The Swan mark is one aspect of our vision to be a company of the future, setting high quality standards regarding the environment.
  • Page 15: Table Of Contents

    A warm welcome to the Contura family. We hope you will get a great deal of pleasure from your new stove. As a new owner of a Contura stove you have secured a product with timeless design and long service life. Contura also has combustion that is both environmentally friendly and efficient for the best heat production.
  • Page 16: Technical Details

    FACTS Important to remember! Technical details Contura 780 Installation by authorised Structural support technician Check that the wood joists are strong enough to bear the weight of the stove and This manual contains instructions about chimney. The stove and chimney can usually...
  • Page 17: Connection To Chimney

    CHIMNEY Connection to chimney • The stove meets the requirements for connecting to chimneys • A flue with sharp bends and horizontal routing reduces the dimensioned for 350°C flue gas temperature. draught in the chimney. Maximum horizontal flue is 1 m, on the condition that the vertical flue length is at least 5 m.
  • Page 18: Supply Of Combustion Air/Option

    The amount of air needed for combustion is approximately 25m C 780 The connector has an external diameter of 67 mm. When duct There is a detachable cover...
  • Page 19: Installation Distance 780

    INSTALLATION DISTANCES Installation distances C 780 The minimum distance in front of WHEN INSTALLING TURNTABLE (OPTION) the following installation distances do not apply. the stove opening to combustible Combustible roof See the separate installation instructions for parts of the building or interior decoration must be at least 1 m.
  • Page 20: Installing 780

    ASSEMBLY Installing C 780 Remove loose parts before the insert is placed on its back Do not tighten the screws until the Do not tighten the screws before stove has been raised again. the sides and back are installed...
  • Page 21 ASSEMBLY Clean the side glass thoroughly before installing the side panels.
  • Page 22 ASSEMBLY Installing rating plate C 780 The following rating plates must be placed on the inside of the cover on the pillar. Final inspection of the installation It is extremely important that the installation is inspected by an authorised chimney sweep before...
  • Page 23: Removing The Loose Parts

    REMOVAL How to remove the hearth surround Handle the vermiculite with care. Lift the smoke baffle with one hand whilst removing the sides. The side posts need not be removed when sweeping. Reinstall in reverse order...
  • Page 24 NIBE AB · Box 134 · SE-285 23 Markaryd · Sweden www.contura.eu Contura reserves the right to change colours, materials, dimensions and models at any time without special notice. 811079 IAV SE-EX C780-8 Your dealer can give you the most up to date information.
  • Page 25 Lighting Instructions C 750 C 780 www.contura.eu...
  • Page 26: Adding Wood

    Lighting Instructions Lighting in the Lighting If the house has mechanical ventilation, open a window near to right way the fireplace prior to lighting. Leave the window open for a few minutes until the fire has caught properly. NOTE! It is important that the correct amount of wood is used, espe- The left hand handle that controls the grate disc must be cially when lighting.
  • Page 27: Maintaining The Stove

    Lighting Instructions Choosing fuel When the stove is new When new, the stove may emit an odour due to excess paint and All types of wood, such as birch, oil coating that may remain on the panels. The odour will disap- beech, oak, elm, ash, conifers and pear completely after several fires.
  • Page 28 NIBE AB· Box 134 · 285 23 Markaryd · Sweden • B e aware of the strong heat radiated through the hatch www.contura.eu glass. Contura reserves the right to change dimensions and pro- • Placing flammable material closer than the safe distance cedures described in these instructions at any time without indicated may cause a fire.

This manual is also suitable for:

C 750C 850750750a810C 860t

Table of Contents