Modem Configuration Commands/Responses; Prime Modem Address; Backup Modem Address; Prime Modem Interface Type - Comtech EF Data SMS-758 Installation And Operation Manual

SMS-758 Modem Protection Switch
B.3.3 Modem Configuration Commands/Responses
B.3.3.1 Prime Modem Address
Address "0" may be used to clear the address field of modem "x".
Command:
Response:
Status Only: <add/ADD_x"cr"
Response:
B.3.3.2 Backup Modem Address
Address "0" may be used to clear the address field of modem "x".
Command:
Response:
Status Only: <add/ADD_Bx"cr"
Response:
B.3.3.3 Prime Modem Interface Type
Command:
Response:
Status Only: <add/INT_x"cr"
Response:
MN/SMS758 Rev. 3
<add/ADD_x_yyy"cr"
>add/ADD_x_yyy"cr""lf"]
>add/ADD_x_yyy"cr""lf"]
Where:
x = 1 to 8 (prime modem number).
yyy = 1 to 255 (prime modem address).
<add/ADD_Bx_yyy"cr"
>add/ADD_Bx_yyy"cr""lf"]
>add/ADD_Bx_yyy"cr""lf"]
Where:
x = 1 to 8 (backup modem number).
yyy = 1 to 255 (backup modem address).
<add/INT_x_y"cr"
>add/INT_x_y"cr""lf"]
>add/INT_x_y"cr""lf"]
Where:
x = 1 to 8 (prime modem number).
y = 1 (for 15 D), 2 (for V.35), 3 (for RS-422), 4 (for DCTN), 7 (for IBS), 8 (for D&I),
5 (for IDR), 6 (for OTHER), or 9 (for IDR 2:N).
Remote Control Operation
B–7