Opt-In Teamdc; Invites; Send An Invite - Kyocera Sprint DuraCore User Manual

● The number of TeamDC members who are connected to the call out of the number
invited (for example, 4 out of 6).

Opt-In TeamDC

Opt-In TeamDC works like a chatroom. You can make and manage Opt-In TeamDC groups in
the same way as you would for TeamDC groups on the Web. You can also send an Invite
during an Opt-In TeamDC call to the group members who have not yet joined the call. (See
Send an Invite during a

Invites

You can send an Invite to initiate a Group Connect call. When the group members receive an
Invite, their phones sound a tone and display your name (if it is in Contacts).
While on a call, you may also send an invitation message to a specific Contacts entry, or to the
group members who have not joined the call yet.

Send an Invite

Reply to an Invite
Send an Invite
Send an Invite to start a call
1. Select a group from History or Contacts.
2. Press MSG/INVITE (left softkey) > DC Invite. (You will see a prompt.)
3. Press and release the DC button.
Send an Invite during a call
To send an Invite during an Opt-In TeamDC call to the group members who have not joined the
call yet:
►
While on an Opt-In TeamDC call, press OPTIONS (right softkey) > Send Invites.
To send an Invite during a Direct Connect or Group Connect call to a personal or group
Contacts entry:
1. While on a Direct Connect or Group Connect call, press OPTIONS (right softkey) > Add
to Call.
2. Select an entry from the displayed list or select one of the following options:

Go to Contacts to select an entry from the available Contacts list.

NEW # (left softkey) to enter a Direct Connect number and press NEXT (left softkey).
Sprint Direct Connect
call.)
47