Make A Teamdc Call; Remove Yourself From A Teamdc Group - Kyocera Sprint DuraXT User Manual

1. In standby mode, press CONTACTS (right softkey).
2. Highlight any entry in the list and press OPTIONS (right softkey) > List TeamDC
Groups.

Your phone will connect to the network and retrieve a current list of TeamDC groups
for your account.

Make a TeamDC Call

Place a call to the members in a TeamDC group.
1. In standby mode, press CONTACTS (right softkey).
– or –
Press > History.
2. Highlight a TeamDC group and press the DC button.
3. Continue the TeamDC call as any other Direct Connect or Group Connect call.
4. When you are finished, press
call that you initiated, all other participants are dropped from the call. To change this
option, see Set Group Termination
Note: Group Termination Options: By default, when the originator of a Group Connect or
TeamDC call ends the call, the system disconnects all other participants as well. When
available, you will be able to select a setting in Settings > DC Settings > Group Call
Options to allow Group Connect and TeamDC calls you initiate to remain active after
you leave the call.
Join or Rejoin a TeamDC Call
If you are not available at the beginning of a call, or if you drop off the call temporarily, you can
rejoin the in-progress TeamDC call.
1. Press > History.
2. Highlight the TeamDC entry and press the DC button.
3. Continue the TeamDC call as described previously.
Tip: You may also join or rejoin a TeamDC call from your Contacts. Select the TeamDC
group and press the DC button.
Note: If the TeamDC call has already ended, pressing the DC button initiates a new TeamDC
call.

Remove Yourself From a TeamDC Group

You may have the option to remove yourself from a TeamDC group.
Sprint Direct Connect
to end the call. (By default, when you end a TeamDC
Options.)
50