Call Setup; Data Settings - Kyocera Duraxa User Manual

3. Select On or Off.
Repeated Tone
You can set how often your phone alerts you when there is a new voicemail or message
notification.
1. Press > Settings > Others > Alerts > Repeated Tone.
2. Select Voicemail or Messages.
3. Select Single Tone (once only) or Repeated Tone (once every minute).
Persistent Alerts
Set alerts, such as beep, vibration, or LED blinking for notifications.
1. Press > Settings > Others > Alerts > Persistent Alerts.
2. Select from the following options:
Audible Tone to beep when notification is on the notification bar.

Vibrate to vibrate when notification is on the notification bar.

Blink LED to blink the LED indicator when notification is on the notification bar.

3. Select On or Off.

Call Setup

You can configure various call-related settings. See

Data Settings

You can turn on or off your phone's data services.
Enable Data Services
When your phone's data services are turned off, you may enable them at any time.
Note: Your phone's data services are turned off by default.
To enable data services:
1. Press > Settings > Others > Data Settings > Data > On. (A message is
displayed.)
Settings
Phone Call Settings.
105