Right Handle Switches - HYOSUNG GD250 Owner's Manual

RIGHT HANDLE SWITCHES

❶
① ENGINE STOP SWITCH
" " Position :
■
when motorcycle has fallen over
to stop engine quickly.
The ignition circuit is off. The
engine cannot start or run.
" " Position :
■
on and the engine can start and
run. Keep in this position for
normal engine operation.
WARNING
Do not operate the engine stop switch
into the " " position while driving at
one's pleasure.
② FRONT BRAKE LEVER
The front brake is applied by squeezing
the brake lever gently toward the throttle
grip.
The front brake is a powerful disk brake
system. Do not brake excessively so as to
cause the front wheel to lock up or skid.
The brake lamp will come on when the
lever is squeezed.
❷
❸
❺ ❹
Use in emergency or
The ignition circuit is
WARNING
Apply the brake lightly and with great
care on slippery surfaces to avoid
skidding.
③ THROTTLE GRIP
Engine speed is controlled by position of
the throttle grip. Turn it toward you to
increase engine speed. Turn it away from
you to decrease the engine speed.
Avoid turning the throttle grip during
braking.
④ HAZARD WARNING SWITCH
■ " " : All four turn signal lamps and
i n d i c a t o r l a m p w i l l f l a s h
simultaneously when the switch
is turn on with the ignition switch
in "ON"·position.
■ " " : The turn signal lamps and
indicator lamp go off.
Use the hazard warning switch to warn
other traffic during emergency parking or
when your vehicle could otherwise become
a traffic hazard.
Turn off the hazard warning switch
promptly after use.
If the motorcycle is ridden with the
hazard warning switch turned on, it
may confuse other drivers.
The battery will eventually become
depleted if the hazards warning
remains on for a period of time without
the engine running.
32
WARNING
CAUTION