HYOSUNG GD250 Owner's Manual page 81

⊙ TIRE REPLACEMENT
■ FRONT TIRE REPLACEMENT
1. Place the motorcycle on the jack or block
vertically.
CAUTION
Improper jacking may cause damage to
the frame or engine.
2. Loosen the four front axle pinch bolts ①·
(right and left).
3. Loosen the front axle nut ②·.
❶
❶
4. Carefully position a jack or block under
engine and raise until the front wheel is
slightly off the ground.
5. Draw out the front axle .
6. Slide the front wheel forward.
7. To reinstall the front wheel assembly,
reverse the sequence as described.
■ REAR TIRE REPLACEMENT
1. Place the motorcycle on the jack or block
vertically.
Improper jacking may cause damage to
the frame or engine.
2. Loosen the rear axle nut ①.
❷
3. Carefully position a jack or block under
engine and raise until the rear wheel is
slightly off the ground.
A hot muffler can burn you.
The muffler will be hot enough to burn
yor for some time after stopping the
engine.
Wait until the muffler cools to avoid
burns.
4. Draw out the rear axle.
5. Pull the rear wheel assembly rear ward.
6. To reinstall the rear wheel assembly,
reverse the complete sequence listed.
80
CAUTION
❶
WARNING