Footrests - HYOSUNG GD250 Owner's Manual

FOOTRESTS

⊙ FOOTREST POSITION ADJUST-
MENT
The 『
footrest position, right and left.
To change the position, remove the M10
footrest mounting bolts ①, ②· and spacer
③, and install the bolts ④, ⑤ by using the
hexagon spanner 8 mm.
❸
❸
❶
[ POSITION
』· has 2 type of the
❶
❷
F
L
❸
❷
Ⓐ
]
❹
[ POSITION
The 『
factory on position Ⓐ.
WARNING
When adjusting the footrest position,
the M10 mounting bolts be torqued to
the proper specification.
If they are not, the footrest can come off
unexpectedly.
TIGHTEN TORQUE
Footrest mounting
bolt
36
❹
❺
F
L
❺
Ⓑ
]
』· is delivered from the
4.0 ~ 5.0 kgf · m
(40 ~ 50 N·m)