HYOSUNG GD250 Owner's Manual page 84

⊙ TURN SIGNAL LAMP'S BULB
REPLACEMENT
1. Remove the lens by removing the
screw.
2. While pushing the bulb, turn it to the
counter-clockwise and pull it out.
3. After stick in the new bulb, turn it to the
clockwise.
4. To reinstall the lens, reverse the above
sequence.
CAUTION
Overtightening the screws may cause
the lens to crack.
⊙ BRAKE / TAIL LAMP'S BULB
REPLACEMENT
The· 『
LED (Light Emitting Diode) type.
If any abnormal condition are found,
replace the brake / tail lamp assembly.
⊙ LICENSE PLATE LAMP'S BULB
REPLACEMENT
1. Remove the lamp housing by unscrewing
the screw ①
2. Pull out the socket
housing.
3. Pull out the bulb
4. Replace the new bulb.
5. To reinstall the license plate lamp,
reverse the above sequence.
83
』's brake / tail lamp are
❸
❷
.
from the lamp
②
at the socket
③
❶
.
②