HYOSUNG GD250 Owner's Manual page 31

⑫ GEAR POSITION INDICATOR
This indicator is displayed gear position as
N, 1, 2, 3, 4, 5 and 6.
If revving the engine into the black zone of
the tachometer, the displayed gear position
is blinked.
⑬ SELECT SWITCH
Use this switch to adjust the following :
■ in the Normal mode
Push it for
Odometer → Trip meter
0.6 ~ 1
→ Trip meter
seconds
→ Odometer
Normal mode (in Clock display) →
2 seconds
Change unit of the
speedometer display
5 seconds
(Refer to the speedometer
⑪)
■ in the Hour reset mode
Push it for
Hour reset mode →
0.6 ~ 1
seconds
■ in the Minutes reset mode
Push it for
Minutes reset mode →
2 seconds
Normal mode (Clock display)
Adjustment
→ Clock
B
Hour reset mode
Adjustment
Minutes reset mode
Adjustment
⑭ RESET SWITCH
Use this switch to adjust the following :
■ in the Normal mode
Push it for
0.6 ~ 1
seconds
2 seconds
■ in the Hour reset mode
Push it for
A
0.6 ~ 1
seconds
■ in the Minutes reset mode
Push it for
0.6 ~ 1
seconds
30
Adjustment
Adjust brightness of the
instrument panel display
(100% → 75% → 50% →
25% → 100%)
Reset the trip meter to zero,
while the display indicates
trip meter or
A
Adjustment
Increase the Hour of clock
Adjustment
Increase the Minutes of
clock
B