Right Handle Switches - HYOSUNG XRX125sm Owner's Manual

④ ④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
■ " " � � " " Position : Flash the left turn
■ " " � � " " Position : Flash the right turn
CAUTION
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the " " OFF" " position after
completing the turn or lane change.
⑤ ⑤
HORN SWITCH
Press the switch to operate the horn.
signal lamp and turn
signal indicator lamp.
signal lamp and turn
signal indicator lamp.

RIGHT HANDLE SWITCHES

�
① ①
ENGINE STOP SWITCH
■ " " " " Position : Using when dangerous
condition of falling down during
drive and others or engine stop
suddenly. The ignition circuit is off.
The engine cannot start or run.
■ " " " " Position : Using when need
operation of engine as drive and
others. The ignition circuit is on
and the engine can run.
Do not operate the engine stop switch to
be in the " " " " position while driving at
one's pleasure.
② ②
FRONT BRAKE LEVER
The front brake is applied by squeezing
the brake lever gently toward the throttle-
grip.
Front brake be anxious about motorcycle
falling down when braking suddenly as disk
brake system. The brake lamp will come on
when the lever is squeezed.
Apply the brake lightly and with great
care on slippery surfaces to avoid
skidding.
22
�
�
�
�
WARNING
WARNING