Gearshift Lever - HYOSUNG GD250 Owner's Manual

GEARSHIFT LEVER

GD250-000010
T h e 『
transmission which operates as shown.
To shift properly, squeeze the clutch lever
and close the throttle at the same time you
operate the gearshift lever.
Whenever a gear is selected, the
gearshift lever will return to its normal
position ready to select the next gear.
Lift the gearshift lever to upshift and
depress the lever to downshift.
Neutral is located between first and 2nd
gear.
When neutral is desired, depress or lift
the lever halfway between first and 2nd
gear.
』 · h a s a 6 - s p e e d
It is not possible to upshift or downshift
more than one gear at a time.
When shifting from first to 2nd gear or
2 n d g e a r t o l o w, n e u t r a l w i l l b e
automatically skipped.
Reduce the motorcycle speed before
down-shifting.
When down-shifting, the engine speed
should be increased before the clutch is
engaged.
This will prevent unnecessary wear on
the drive train components and the rear
tire.
When the transmission is in neutral, the
green indicator lamp on the instrument
panel will be lit.
However, even though the light is
illuminated, cautiously release the
clutch lever slowly to determine
whether the transmission is positively
in neutral.
35
CAUTION