HYOSUNG GD250 Owner's Manual page 27

⑧ O DOMETER / TRIP METER
/ CLOCK
The display in it has four functions, the
odometer, two trip meters and clock.
The display changes the odometer, trip
meter or clock, as indicated before turning
the ignition switch off.
The odometer registers the total distance
that the motorcycle has been ridden.
The two trip meters are resettable
odometer.
They can register two kinds of distance at
the same time. For instance, trip meter A
can register the trip distance and trip meter
B · can register the distance between fuel
stops.
To change the display, push the switch ⑬· ·
(in the Normal mode) for 0.6 ~ 1 seconds
while the display indicates the odometer,
trip meter A , trip meter B
want to change.
· ·
· or clock you
26
Odometer
Trip meter A
Trip meter B
Clock
To reset the trip meter to zero, push the
switch ⑭·(in the Normal mode) for 2
seconds while the display indicates trip
meter A or B you want to reset.