LifeGear 76140 E1 Sit-Up Bench Owner's Manual page 9

5
Step 2
Attach the Back Pad Tubes (3) onto the Bench Frame (1) with one M10x150 Bolt (21), one
M10 Nylon Nut (28), and two Ø10 Washers (27). Attach the Back Pad Adjustable Tube (2)
onto the Back Pad Tubes (3) with one M10x150 Bolt (21), one M10 Nylon Nut (28), and two
Ø10 Washers (27). Tighten bolts and nuts with two Wrenches provided.
Attach the Back Pad (4) onto the Back Pad Tubes (3) with four M6x40 Bolts (23) and four
Ø6 Washers (26). Tighten bolts with the Wrench provided.
Attach the Seat Pad (5) onto the Bench Frame (1) with four M8x20 Bolts (24) and four Ø8
Washers (25). Tighten bolts with the Wrench provided.
Hardware:
(21) Bolt M10x150
2 PCS
(23) Bolt M6x40
4 PCS
(24) Bolt M8x20
4 PCS
3
27
4
28
28
27
27
1
25
24
(27) Washer Ø10
(26) Washer Ø6
(25) Washer Ø8
26
23
3
27
21
2
21
4 PCS
4 PCS
4 PCS
8
Tool:
1 Wrench (14-10)
2 Wrenches (14-17)
(28) Nylon Nut M10
2 PCS