Assembly Instructions - LifeGear 76140 E1 Sit-Up Bench Owner's Manual

ASSEMBLY INSTRUCTIONS

6
28
27
29
Tool:
27
22
29
1
28
2 Wrenches (14-17)
27
27
9
22
Step 1
Attach the Front Frame (6) onto the Bench Frame (1) with two M10x70 Bolts (22), two M10
Nylon Nuts (28), and four Ø10 Washers (27). Tighten bolts and nuts with two Wrenches
provided. Install four M10 Cap Nuts (29) onto the M10x70 Bolts (22) and M10 Nylon Nuts
(28).
Attach the Rear Stabilizer (9) onto the Bench Frame (1) with two M10x70 Bolts (22), two
M10 Nylon Nuts (28), and four Ø10 Washers (27). Tighten bolts and nuts with two
Wrenches provided.
Hardware:
(27) Washer Ø10
(22) Bolt M10x70 (28) Nylon Nut M10
8 PCS
4 PCS 4 PCS
7