Channel-Zero Encoding - HIKVISION DS-9600NI-ST Series Quick Operation Manual

User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR

3.4 Channel-zero Encoding

Purpose:
Sometimes you need to get a remote view of many channels in real time from web browser or CMS(Client
Management System) software, in order to decrease the bandwidth requirement without affecting the image quality,
channel-zero encoding is supported as an option for you.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
2. Select the Channel-Zero Encoding tab.
3. Check the checkbox after Enable Channel Zero Encoding.
4.
Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
After you set the Channel-Zero encoding, you can get a view in the remote client or IE browser of all the channels in
one screen.
Figure 3.8 Live View- Channel-Zero Encoding
50