HIKVISION DS-9600NI-ST Series Quick Operation Manual page 113

User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property to
Note:
Redundant. For detailed information, please refer to Chapter 10.4 Managing HDD Group. There should be at least
another HDD which is in Read/Write status.
3.
Enter the Record setting interface.
Menu> Record> Encoding
Select Record tab.
1)
2) Select Camera you want to configure.
Check the checkbox of Redundant Record/Capture to Yes.
3)
Click OK to save settings and back to the upper level menu.
4)
Repeat the above steps for configuring other channels.
Figure 5.26 Encoding Record
79