Editing Ip Cameras Connected To The Poe Interfaces (Only For Ds-7600/7700Ni-Sp Series Nvr) - HIKVISION DS-9600NI-ST Series Quick Operation Manual

User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
3. Choose the protocols you just added to validate the connection of the network camera.
2.2.3 Editing IP cameras connected to the PoE interfaces (Only
for DS-7600/7700NI-SP series NVR)
The PoE interfaces enables the NVR system to pass electrical power safely, along with data, on Ethernet cabling to
the connected network cameras.
The DS-7600/7700NI-SP series NVR provides 8 PoE interfaces which can connect to 8 network cameras directly;
and if you disable the PoE interface, you can also connect to the online network cameras. And the PoE interface
supports the Plug-and-Play function.
Example:
As for 7608/7708NI-SP NVR, when you want to connect 2 online cameras and connect 6 network cameras via PoE
interfaces, you must disable 2 PoE interface in the Edit IP camera panel.
To add Cameras for NVR supporting PoE function:
Before you start:
Connect the network cameras via the PoE interfaces.
Steps:
1. Enter the Camera Management interface.
Main menu> Camera> Camera
You can see the connected cameras are listed.
Figure 2. 15 Protocol Setting
40