Network Setup (Lan Cable Connection) - Kyocera FS-3040MFP Operation Manual

Network Setup (LAN Cable Connection)

The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4),
TCP/IP (IPv6), IPX/SPX, NetBEUI, IPSec, and AppleTalk. It enables network printing on the Windows, Macintosh,
UNIX, NetWare and other platforms.
The table below shows the items required for each of the settings.
Configure the printer's network parameters as appropriate for your PC and your network environment.
For details of the procedure, refer to the Network Setup on page 8-117 or Network Security on page 8-136.
NOTE:
When COMMAND CENTER is used, network parameters and security settings can be conveniently
changed and checked from your PC. For more information, refer to COMMAND CENTER (Settings for E-mail) on
page 2-28.
Menu
System Network
Setting
Downloaded From ManualsPrinter.com Manuals
Submenu
TCP/IP TCP/IP
Settings
IPv4 Setting
IPv6 Setting
Protocol Detail
2-14
Preparation before Use
On/Off
DHCP On/Off
Bonjour On/Off
IP Address IP address
Subnet Mask IP address
Default Gateway IP address
On/Off
NetBEUI On/Off
SNMPv3 On/Off
FTP (Server) On/Off
FTP (Client) On/Off
Port number: 21
SMB On/Off
SNMP On/Off
SMTP (E-mail TX) On/Off
POP3 (E-mail RX) On/Off
RAW Port On/Off
LPD On/Off
IPP On/Off
Port number: 631
IPP Over SSL On/Off
HTTP On/Off
HTTPS On/Off
LDAP On/Off
Setting