SNMPv3 Setting
Sets up SNMPv3. The default setting is Off. Use the procedure below.
Refer to Protocol Detail on page 8-133 about the procedures.
Downloaded From ManualsPrinter.com Manuals
LDAP Security:
1 *Off
*********************
2
LDAPv3/TLS
3
LDAP over SSL
8
Press the OK key. LDAP Security appears.
a b
9
Press the
[LDAP over SSL].
10
Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
8-142
Default Setting (System Menu)
or
key to select [Off], [LDAPv3/TLS] or