Kyocera FS-3040MFP Operation Manual page 373

Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.] is
selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide of the
LDAP server.
Use the procedure below to enable group authentication.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.: a b
4
*********************
5
6
Login User Name
Login Password:
User/Job Account: a b
1
*********************
2
3
User Login Set.:
1
*********************
2
3
Downloaded From ManualsPrinter.com Manuals
User/Job Account
User Property
Common Settings
[ Exit
L b
*******************
[ Login
User Login Set.
Job Account. Set.
Unknown ID Job
[ Exit
User Login
Local User List
Group Auth.
[ Exit
1
Press the System Menu/Counter key on the main unit
operation panel.
2
In the Sys. Menu/Count. menu, press the
select [User/Job Account].
]
If user login administration is disabled, the user
authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you
need to log in with administrator privileges. Refer to
Adding a User on page 11-6 for the default login user
name and password.
]
3
Press the OK key. The User/Job Account menu appears.
]
4
Press the
5
Press the OK key. The User Login Set. menu appears.
a b
]
6
Press the
11-11
or key to select [User Login Set.].
or key to select [Group Auth.].
Management
or key to
11