Kyocera FS-3040MFP Operation Manual page 329

LDAP Security
Specify the protocol to be used for LDAP. The default setting is Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
2
3
*********************
Login User Name:
Login Password:
System:
1
*********************
2
3
Network Setting: a b
7
*********************
8
9
Secure Protocol: a b
2
3
4
*********************
Downloaded From ManualsPrinter.com Manuals
Report
Counter
System
[ Exit
L b
*******************
[ Login
a b
Network Setting
I/F Block Set.
Security Level
[ Exit
Secure Protocol
Host Name
LAN Interface
[ Exit
IPP Security
HTTP Security
LDAP Security
[ Exit
1
In the Sys. Menu/Count. menu, press the
select [System], and press the OK key.
]
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
]
2
The System menu appears.
]
3
Press the or
4
Press the OK key. The Network Setting menu appears.
]
5
Press the or
6
Press the OK key. Secure Protocol appears.
]
7
Press the or
8-141
Default Setting (System Menu)
or
key to select [Network Setting].
key to select [Secure Protocol].
key to select [LDAP Security].
key to
8