Kyocera FS-3040MFP Operation Manual page 222

Auto Sleep
If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to Sleep and Auto Sleep on page 2-
8 for Sleep Mode.
• Auto Sleep ON/OFF
Select whether to use Auto Sleep or not. The default setting is On.
NOTE:
Time remaining before Auto Sleep can be modified as necessary.
Use the procedure below to specify the auto sleep setting.
Downloaded From ManualsPrinter.com Manuals
Login User Name:
*******************
Login Password:
[ Login
Timer Setting:
1
Err. Clear Timer
*********************
2
Sleep Timer
3
PanelReset Timer
[ Exit
Err. Clear Timer:
(5 - 495)
******30*sec.
Sys. Menu/Count.: a b
3
System
4 User/Job Account
5
Common Settings
*********************
[ Exit
A login screen will appear. Then, enter the user ID and
L b
password with administrator privileges to log in, and
press [Login] (the Right Select key).
]
4
The Timer Settings menu appears.
a b
]
5
Press the
6
Press the OK key. Err. Clear Timer appears.
* b
7
Press the
the amount of time before clearing errors in seconds.
You cannot use the numeric keys to enter this value.
8
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
1
In the Sys. Menu/Count. menu, press the
select [Common Settings].
]
8-34
Default Setting (System Menu)
or key to select [Err. Clear Timer].
or key to set the Error Clear Timer. Set
or key to