Kyocera FS-3040MFP Operation Manual page 269

FormFeed Timeout
Receiving print data from the computer, the machine may sometimes wait if there is no information signalling that the
last page does not have any more data to be printed. When the preset timeout passes, the machine automatically
prints paper. The options are between 5 and 495 seconds.
Use the procedure below to set the form feed timeout.
Sys. Menu/Count.:a b
5
6
********************* 7
Printer:
1
*********************
2
3
FormFeed
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH). The table below shows
the available settings. The default setting is LF Only.
Use the procedure below to specify a LF action.
Downloaded From ManualsPrinter.com Manuals
Common Settings
Copy
Printer
[ Exit
a b
Emulation Set.
EcoPrint
Override A4/LTR
[ Exit
b
TimeOut:*
(5 - 495)
******30*Sec.
Item
LF Only
LF and CR
Ignore LF
1
In the Sys. Menu/Count. menu, press the
select [Printer].
]
2
Press the OK key. The Printer menu appears.
]
3
Press the or
4
Press the OK key. FormFeed Timeout appears.
5
Press the or
can set the timeout delay in seconds. You cannot use the
numeric keys to enter this value.
6
Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Description
Only line feed performed.
Line feed and character return performed.
No line feed performed.
8-81
Default Setting (System Menu)
key to select [FormFeed Timeout].
key to set the Form Feed Timeout. You
or key to
8