Kyocera FS-3040MFP Operation Manual page 99

The procedure for using two-sided/duplex copying is explained below.
Function Menu:
1
*********************
2
3
Duplex:
1 *1-sided>>1-sided
*********************
2
3
Finish. Binding: a b
1 *o Left/Right
*********************
2
Orig.Orientation: a b
1
2 *d Top Edge left *********************
Orig. Binding:
1 *o Left/Right
*********************
2
Orig.Orientation: a b
1
2 *d Top Edge left
*********************
Downloaded From ManualsPrinter.com Manuals
a b
Paper Selection T
T
Collate
Duplex T
[ Exit
a b
1-sided>>2-sided
2-sided>>1-sied
p Top
c Top Edge Top
a b
p Top
c Top Edge Top
1
Press the Function Menu key. Function Menu appears.
]
2
Press the or
3
Press the OK key. Duplex appears.
4
Press the or
copying mode.
If you select [1-sided>>2-sided], press [Detail] (the Right
Select key) and you can select the binding edge of the
finished copies and the original setting orientation.
After pressing the OK key, select the binding edge of the
finished copies and the original setting orientation.
If you select [2-sided>>1-sided], press [Detail] (the Right
Select key) and you can select the binding edge of the
original and the original setting orientation.
After pressing the OK key, select the binding edge of the
original and finished copies, and the original setting
orientation.
3-13
Basic Operation
key to select [Duplex].
key to select the desired duplex
3