Service Setting: a b
1
*********************
2
3
Print.
Are you sure?
z Network Status
[
NOTE:
When acceptance of jobs is prohibited, Print, storing functions are restricted now. is displayed and the
output is canceled.
Send Result Report
Automatically print a report of transmission result when a transmission is complete. The table below shows the
available settings. The default setting is Error Only.
Use the procedure below to send a Result Report.
Sys. Menu/Count.:a b
1
*********************
2
3
Downloaded From ManualsPrinter.com Manuals
Service Status
Network Status
New Developer
[ Exit
Yes
] [
No
Item
Off
On
Error Only
Report
Counter
System
[ Exit
3
Press the
or
4
Press the OK key. Service Setting appears.
]
5
Press the
or
[Network Status].
6
Press the OK key. A confirmation screen appears.
The screen shown is the one when Network Status is
selected.
]
7
Press [Yes] (the Left Select key). The selected report is
output. Accepted. is displayed and the screen returns to
the Service Setting menu.
Description
No result report printed.
Result report automatically printed.
Transmitted images can also be attached.
Result report printed only when a
transmission ends in an error. If two or
more destinations are registered, the
reports are printed only for the destinations
with the errors. Transmitted images can
also be attached.
1
In the Sys. Menu/Count. menu, press the
select [Report].
]
8-93
Default Setting (System Menu)
key to select [Service Setting].
key to select [Service Status] or
or
8
key to