Getting Started; Setting Up The Terminal - Nokia 30 GSM User Manual

3. Getting started

Setting up the terminal

To use the Nokia 30 GSM Connectivity Terminal for the first time, proceed as follows:
1. Install the SIM card as described on page 13.
2. Mount the terminal on the data adapter RS-232.
3. Place the terminal in a proper location considering the field strength and antenna's functionality.
4. Connect the data cable RS-232 to the terminal and to a compatible PC or other compatible device.
Connect the power supply ACW-5A to the terminal and to an AC wall outlet.
5. Enter the PIN code if your SIM card requires it.
Warning! To avoid damage to the SIM card, do not install, move or remove the SIM card if the power
supply is connected to an AC wall outlet. Mount the terminal on the data adapter RS-232 before
connecting the power supply.
Copyright ©2002 Nokia. All rights reserved.
12