Configure Nokia modem options
In order to use the Nokia 30 terminal as a wireless
modem, Nokia Modem Options must be configured for
your PC. These options define the modem to be used,
the connection type, GSM connection speed kbits/s and
the GPRS access point.
For example, to set the Installed Nokia modems using
MS Windows 2000:
1. In the Windows taskbar, press Start and select
Settings and Control Panel.
2. In the Control Panel, select Nokia Modem Options.
3. Select Nokia 30 (cable) from the Installed Nokia
If you have a HSCSD connection from your service
provider, you can use connection speed up to 43.2
If you have a CSD connection from your service
provider, you will be limited to a connection speed of 9.6 or 14.4 kbts/s.
If you have a GPRS connection from your Internet service provider, you must specify a GPRS access
point for the terminal. This access point is provided by the Internet service provider who provides
the SIM card used in the Nokia 30 terminal.
4. When the Nokia Modem Options settings are determined select Apply and then select OK.
Copyright ©2002 Nokia. All rights reserved.