Nokia 30 GSM User Manual page 16

• RS-232 connector
1. Mount the Nokia 30 on the data adapter RS-232 first in order to
connect the terminal with a compatible PC or other compatible
devices.
2. Attach the data cable RS-232 to the adapter.
3. Connect the data cable from the terminal to a compatible PC or other
compatible device. Use only the data cable RS-232 supplied by Nokia.
• Power connector
The Nokia 30 power connector is at the back end of the terminal, opposite
the light indicators. When the Nokia 30 terminal is mounted on the RS-
232 adapter the power interface is found under the edge of the adapter.
- Connect the power cord from the power supply to the terminal.
- Connect the power supply to an AC wall outlet.
• External antenna connector
The external antenna connector is located next to the SIM card slot ( see picture on page 39). The
external antenna can be used with the external antenna cable (XRM-1) accessory if the signal strength
is insufficient.
- To connect the external antenna cable to the Nokia 30, cut off a piece of the SIM cover to fit the
cable in.
- Connect an external antenna with the FME connector to the other end of the external antenna cable.
Copyright ©2002 Nokia. All rights reserved.
16