Three ways of using the Nokia 30 with a compatible PC or other
Connected to a PC as a wireless modem
The Nokia 30 is connected to your computer and is installed on your computer as a modem.
Communications applications can subsequently be used to send and receive data over the wireless
connection provided by the Nokia 30. For more detailed information, see Modem installation for Nokia
30 terminal on page 21.
Connected to a PC and typing the AT commands on a terminal software
The AT commands are typed directly in an application, for example Hyper Terminal®. The Nokia 30,
used as a modem, follows these commands. See Entering the PIN code as an example of this on page
Connected to an electronics application
When the Nokia 30 terminal is connected to the data adapter RS-232, it can be attached to a device
with a serial interface for a modem. This device communicates with the Nokia 30 via the RS-232
interface using integrated AT commands. Read more about the use of Nokia 30 for M2M
communications on page 49.
Copyright ©2002 Nokia. All rights reserved.