Rear Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha XP500A Owner's Manual

Rear turn signal light bulb

If a rear turn signal light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAUT1330
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1
1. Screw
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
EAU24313
1. License plate light unit
2. License plate light bulb socket
7-32
1
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
2
2
3
4
5
6
7
8
9