INSTRUMENT AND CONTROL FUNCTIONS
Sidestand
The sidestand is located on the left side
of the frame. Raise the sidestand or
lower it with your foot while holding the
1
vehicle upright.
TIP
2
The built-in sidestand switch is part of
the ignition circuit cut-off system, which
3
cuts the ignition in certain situations.
(See page 4-21 for an explanation of
4
the ignition circuit cut-off system.)
5
WARNING
The vehicle must not be ridden with
the sidestand down, or if the side-
6
stand cannot be properly moved up
(or does not stay up), otherwise the
7
sidestand could contact the ground
and distract the operator, resulting
8
in a possible loss of control.
Yamaha's ignition circuit cut-off
system has been designed to assist
9
the operator in fulfilling the respon-
sibility of raising the sidestand be-
fore starting off. Therefore, check
this system regularly and have a
Yamaha dealer repair it if it does not
EAU15304
function properly.
EWA10241
Ignition circuit cut-off system
The ignition circuit cut-off system (com-
prising the sidestand switch and brake
light switches) has the following func-
tions.
Periodically check the operation of the
ignition circuit cut-off system according
to the following procedure.
4-21
G
It prevents starting when the side-
stand is up, but neither brake is ap-
plied.
G
It prevents starting when either
brake is applied, but the sidestand
is still down.
G
It cuts the running engine when the
sidestand is moved down.
EAU45051