Helmet Holder; Storage Compartments - Yamaha XP500A Owner's Manual

Helmet holder

3
1
1. Shaded projection
2. Helmet holding cable
3. Helmet holder
The helmet holder is located under the
seat. A helmet holding cable is provid-
ed beside the owner's tool kit to secure
a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Open the seat. (See page 4-16.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
3. Make sure the helmet holding ca-
INSTRUMENT AND CONTROL FUNCTIONS
EAU46300 ble is not touching the shaded pro-
jection, and securely close the
seat. WARNING! Never ride with
a helmet attached to the helmet
holder, since the helmet may hit
2 objects, causing loss of control
and possibly an accident.
To release the helmet from the hel-
met holder
Open the seat, remove the helmet
holding cable from the helmet holder
and the helmet, and then close the
seat.

Storage compartments

Front storage compartments A and
B
To open a front storage compartment,
slide the lever up, and then pull on the
[EWA10161]
lever. WARNING! Do not store heavy
items in these compartments.
1. Storage compartment opening lever
2. Front storage compartment A
4-18
1
2
EAU44993
2
[EWA14861]
3
4
5
6
7
8
9