Rear Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha XMAX 300 Owner's Manual

Rear turn signal light bulb

If a rear turn signal light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.
Periodic maintenance and adjustment
EAUT1331
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the bolts and plate,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
4
1. License plate light unit
2. Bolt
3. License plate light bulb socket
4. Plate
2. Remove the burnt-out bulb by
pulling it out.
8-32
EAU78560
1. License plate light bulb
3
3. Insert a new bulb into the socket.
1
4. Install the socket (together with
the bulb) by pushing it in, and then
install the license plate light unit by
installing the plate and bolts.
2
1
8