Tail/Brake Light; Replacing A Front Turn Signal Light Bulb - Yamaha XP500A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
bulb.
1
2
3
1. Headlight bulb holder
4
2. Unhook.
3. Place a new headlight bulb into po-
5
sition, and then secure it with the
bulb holder.
6
4. Install the headlight bulb cover,
and then connect the coupler.
7
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
8
9

Tail/brake light

1
If the tail/brake light does not come on,
have a Yamaha dealer check its electri-
cal circuit or replace the bulb.
2
EAU43040
Replacing a front turn signal
light bulb
1. Turn signal light bulb socket
7-31
1. Place the scooter on the center-
stand.
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
EAU43051