Multi-Function Display - Yamaha XP500A Owner's Manual

Multi-function display

WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function display.
settings while riding can distract the
operator and increase the risk of an
accident.
1
4
1. Tachometer
2. Tachometer red zone
3. V-belt replacement indicator "V-BELT"
4. Odometer/tripmeters
INSTRUMENT AND CONTROL FUNCTIONS
EAU44968
EWA12312
Changing
1. Clock
2. Oil change indicator "OIL"
2
1
3
2
1. "RESET" button
2. "SELECT" button
The multi-function display is equipped
with the following:
G
a tachometer
G
an odometer
G
1 2
G
G
G
G
G
TIP
G
G
4-6
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled when
the remaining fuel in the fuel tank
reaches approximately 3.0 L (0.79
US gal, 0.66 Imp.gal))
a self-diagnosis device
a clock
an oil change tripmeter (which
shows the distance traveled since
the last engine oil change)
a V-belt replacement tripmeter
(which shows the distance trav-
eled since the last V-belt replace-
ment)
Be sure to turn the key to "ON" be-
fore using the "SELECT" and
"RESET" buttons.
When the key is turned to "ON", all
of the display segments of the
multi-function display will appear
one after the other and then disap-
pear, in order to test the electrical
circuits.
2
3
4
5
6
7
8
9