Indicator And Warning Lights - Yamaha XP500A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
To lock the steering
1. Turn the handlebars all the way to
the left.
2. Push the key in from the "OFF" po-
1 sition, and then turn it to "LOCK"
while still pushing it.
3. Remove the key.
2
To unlock the steering
3
Push the key in, and then turn it to
"OFF" while still pushing it.
4
(Parking)
5
The steering is locked, and the taillight,
license plate light and auxiliary lights
are on. The hazard lights and turn sig-
6
nal lights can be turned on, but all other
electrical systems are off. The key can
7
be removed.
The steering must be locked before the
8
key can be turned to "
NOTICE
9
Do not use the parking position for
an extended length of time, other-
wise the battery may discharge.

Indicator and warning lights

2 1
1. Turn signal indicator lights "
EAU10941
2. High beam indicator light "
3. Immobilizer system indicator light
4. Engine trouble warning light "
Turn signal indicator lights "
" "
The corresponding indicator light flash-
es when the turn signal switch is
".
pushed to the left or right.
ECA11020
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11004
Engine trouble warning light "
This warning light comes on if an elec-
1
3 4
trical circuit monitoring the engine is not
working correctly. If this occurs, have a
Yamaha dealer check the self-diagno-
sis system.
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "ON",
" and " "
or if the warning light remains on, have
"
a Yamaha dealer check the electrical
circuit.
"
TIP
EAU11030
This warning light will come on when
" and
the key is turned to "ON" and the start
switch is pushed, but this does not indi-
cate a malfunction.
Immobilizer system indicator light
EAU11080
"
The electrical circuit of the indicator
light can be checked by turning the key
to "ON". The indicator light should
come on for a few seconds, and then
4-3
EAU43023
"
EAU38624