Dean D50 Installation, Operation & Maintenance Manual page 8

c. All Installations: If the floor is uneven
or has a
recommended to place the fryer on a
smooth platform.
leg/caster thread adjustment.
d. Re-leveling: If the fryer is moved, re-
level the
instructions given in Step 3.4.
e. Restraints:
restrained to prevent tipping when
installed in order to prevent the
splashing of hot shortening.
means of restraint depends on the type
of application, such as connecting to a
battery of appliances or installing the
fryer in an alcove, or by separate
means, such as restraining devices. A
bracket has been provided on the fryer
back panel for this purpose.
The install must be reviewed at the
time of installation to ensure it meets
the intent of these instructions. The
on-site supervisor and/or operator(s)
should be made aware there is a
restraint on the appliance and, if
disconnection of the restraint is
necessary, to reconnect this restraint
after the appliance has been returned
to its originally installed position.
3.5 GAS CATEGORIES:
The Dean Decathlon D50G and D60G
Gas Fryers have obtained CE markings for
countries and gas categories shown below:
Countries Supply Pressures
and Gas (mbar)
G20
BE Belgium
G31
G20
DE Germany
G31
DK Denmark G20
G20
ES Spain
G31
G20/G25 20/25
FR France
G31
definite slope, it
Do not rely on
fryer following the
This fryer must be
The
Appliance
Categories
20/25 I2E (R) B
37 I3P
20 I2E
50 I3P
20 I2H
20
II2H3P
37 and 50
II2ESI3P
37 and 50
Countries
is
GB Great Britain
GR Greece
IR Ireland
IT Italy
LU Luxembourg
The
NL
Netherlands G31
PT Portugal
3.6 GAS CONNECTIONS:
The gas supply (service) line must be the
same size or greater than the fryer inlet
line. This fryer is equipped with a 19 mm
(3/4") male ISO 7.1 inlet; however, the
gas supply lines must be sized to
accommodate all the gas-fired equipment
that may be connected to that gas supply.
Consult your contractor, gas company,
supplier,
authorities.
PUTTING AN OPEN FLAME BESIDE A
NEW CONNECTION IS NOT ONLY
DANGEROUS, BUT WILL OFTEN MISS
SMALL LEAKS THAT A SOAPY
SOLUTION WILL FIND.
a. Piping Sizes:
number of fryers to be connected, the
gas supply line must be sized as
indicated in the chart below:
7
Supply Pressures
and Gas (mbar)
G20 20
G31 37
G20 20
G31 37 and 50
G20 20
G31 37
G20 20
G20/G25 20/25
G31 50
G25 25
50
G20 20
G31 37
or other knowledgeable
WARNING!
According to the
Appliance
Categories
II2H3P
II2H3P
II2H3P
I2H
II2E3P
II2L3P
II2H3P