Setting The Display Lighting; Activating/Deactivating Auto Answer; Changing The Speaker/Earpiece Volume - Gigaset E490 Manual

¢ ¢
v Ð
Display
The current setting is displayed.
¤
Change multiple line input:
Activation
Select On (screen picture is displayed) or
Off (no screen picture).
Selection:
Change screen picture if necessary (see
below).
¤
Save the changes.
If the screen picture conceals the display,
briefly press a to show the idle display
with time and date.
Changing the screen picture
¢ ¢
v Ð
Display
s
Scroll to the Selection line.
§View§
Press the display key. The active
screen picture is displayed.
s
Select screen picture and
§Save§
press
¤
Save the changes.

Setting the display lighting

Depending on whether or not the handset is
in the charging cradle, you can activate or
deactivate the lighting. If it is activated, the
display is permanently dimmed.
¢ ¢
v Ð
Display
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select On or Off.
Without Charger
Select On or Off.
Please note
With the On setting, the standby time of
the handset can be significantly reduced.
§Save§
Press the display key.
a
Press and hold (idle status).
¢
Screen Picture
¢
Screen Picture
.
¢
Backlight
Activating/deactivating auto
answer
If you activate this function, when you
receive a call you can simply lift the handset
out of the charging cradle without having to
press the talk key c.
¢ ¢
v Ð
Handset
Auto Answer
Select and press
a
Press and hold (idle status).
Changing the speaker/
earpiece volume
You can set the loudspeaker volume for
speaker mode to five different levels and the
earpiece volume to three different levels.
¢
t
Handset Volume
r
Set the earpiece volume.
s
Scroll to the Speaker line.
r
Set the speaker volume.
§Save§
Press display key if necessary to
save the setting permanently.
Setting the volume during a call:
t
Press the control key.
r
Select volume.
§Save§
Press display key if necessary to
save the setting permanently.
The setting will automatically be saved after
approx. 3 seconds, if not then press the dis-
§Save§
play key .
If t is assigned to another function:
§Options§
Open menu.
Volume Select and press
Configure setting (see above).
Please note
You can also make these settings via the
¢
menu ( page 20).
Handset settings
‰
§OK§
( = on).
§OK§
.
51