Connection settings:
Domain—Enter the domain name obtained from your
service provider.
Access point
name—Enter the push-to-talk access point
name. The access point name is needed to establish a
connection to the GSM/GPRS network.
Server
address—Enter the IP address or domain name of
the push-to-talk server obtained from your service
provider.
User
name—Enter your user name obtained from your
service provider.
Password—Enter a password, if required, to make a data
connection. The password is usually provided by the service
provider and is often case-sensitive.
Log in to push to talk
Press
, and select
My Own
automatically logs in to the service when started.
When log in is successful, push to talk automatically
connects to groups that were active when the application
was last closed. If the connection is lost, the device
automatically tries to log back in until you choose to exit
push to talk.
>
Push to
talk. Push to talk
Exit push to talk
Select
Options
> Exit.
Switch Push to talk off after
exiting application?
is displayed. Select
application active on the background or
close the service.
If several applications are open and you want to switch
from one application to another, press and hold
Make a one-to-one call
Select
Options
>
PTT
contacts.
Scroll to the contact you want to talk to from the list and
select
Options
>
Talk 1 to
Press and hold
the entire time you are talking. When
you have finished talking, release
You must end the one-to-one call before you can create a
new call. Select
Disconnect
Tip! Remember to hold the device in front of you
during a push-to-talk call so you can see the display.
Speak towards the microphone, and do not cover the
loudspeaker with your hands.
Answer a one-to-one call
Press
to start a one-to-one call or
the call.
Copyright © 2006 Nokia. All rights reserved.
Yes
to keep the
No
to log out and
.
1.
.
or press
.
to dismiss
71