Log In To Push To Talk; Exit Push To Talk; Make A One-To-One Call; Answer A One-To-One Call - Nokia N91 User Manual

Connection:
Domain—Enter the domain name obtained from your
service provider.
Access point name—Enter the push-to-talk access point
name. The access point name is needed to establish a
connection to the GSM/GPRS network.
Server address—Enter the IP address or domain name of
the push-to-talk server obtained from your service
provider.
User name—Enter your user name obtained from your
service provider.
PTT password—Enter a password, if required, to make a
data connection. The password is usually provided by the
service provider and is often case-sensitive.

Log in to push to talk

Press , and select
talk automatically logs in to the service when started.
When log in is successful, push to talk automatically
connects to groups that were active when the application
was last closed. If the connection is lost, the device
automatically tries to log back in until you choose to exit
push to talk.
72 Copyright © 2005 Nokia. All rights reserved.
My Own > Push to talk. Push to

Exit push to talk

Select Options > Exit. Switch Push to talk off after
exiting application? is displayed. Select
application active on the background or
close the service.
If several applications are open and you want to switch
from one application to another, press and hold

Make a one-to-one call

Select Options > PTT contacts.
Select the contact you want to talk to from the list and
select Options > Talk 1 to
Press and hold the entire time you are talking. When
you have finished talking, release
You must end the one-to-one call before you can create a
new call. Select Disconnect
Tip! Remember to hold the device in front of you
during a push-to-talk call so you can see the display.
Speak towards the microphone, and do not cover the
loudspeaker with your hands.

Answer a one-to-one call

Press to start a one-to-one call or
call.
Yes to keep the
No to log out and
.
1.
.
or press .
to dismiss the